Month: September 2017

It happens all the time. A sprinkler breaks on your lawn and you probably don’t know about it until you realize there’s a patch of grass starting to turn yellow and dry up. Or, you learn about it quickly when you see a massive puddle of water near your driveway from a busted sprinkler head and water having spewed out throughout the 15 minutes watering cycle.

Should you can a landscaper to come by and fix it? Maybe call a handyman that knows how to fix a busted sprinkler?

You know what? You don’t gotta do any of that! You can fix a busted sprinkler yourself in no time at all. Not only that, you can fix a busted sprinkler for under $10. Let us show you how to do it.

These days, sprinklers are pretty much all the same. They all work pretty much in the same way with water running underneath them and the water pressure making them “pop out” of their small casing and spraying water towards wherever the water spout is pointing. The only thing you have to really worry about is getting one that’s pretty similar to the one that is there in the first place. So the very first thing you will need to do is to dig out the area around the sprinkler and simply turn and unscrew it right outta the ground. All sprinklers are connected underneath to the main water supply line that can be anywhere from 1/2 inch to 2 inches wide. It’s usually white. Each sprinkler is connected to that supply line by a 1/2 connection.

So, just dig around the busted sprinkler, about 1 to 2 inches around it to give you room to simply unscrew it from the supply line. Pull it out slowly so you don’t get a bunch of dirt inside the open hole you’ll leave once you remove it. One of two things will happen when you unscrew it. It will come out with the small 1/2 pipe attached to it on the bottom or it will come out without it and the small pipe will stay on the supply line. Either way, you are fine. If you leave the small pipe behind, use a plastic pipe extractor to push into the pipe and it will grip it, then unscrew it out.

Next look at the sprinkler that you have. Take it with you to the nearest hardware supply store and look for one similar to it. There’s a very big chance you will find the exact same one in one of those big home improvement stores. These sprinklers have a head on them with a different variety of waterspouts to change the flow of water that they spray. There are 1/4 circle spouts that usually go on the corner end of a lawn.  There are half circle spouts that go directly on the side of a lawn. Then there is full circle spout ends that go on the middle of lawns. There are even adjustable ones but the cost a bit more. Simply look at what you have before. Purchase the one you need and also a cheap roll of Teflon tape.

Once you get home, attach the small 1/2 inch size pipe on the bottom of the sprinkler with a little Teflon tape wrapped around it first. Once it’s on there, wrap Teflon tape around the threading of the part that will go to the supply line underneath. Screw the whole thing onto the supply line and tighten by hand only. Those things are all plastic and will break with a pair of pliers or channel locks. Make sure you face the 1/4 circle or half circle in the right direction (Full circle you don’t worry about). The sprinkler will have a marking to show you where the water spout will be. Once in the ground, fill up the open ground with the original dirt and grass you dug out in the first place. Pack it nice and tight. Go turn on the sprinkler and test it out. You’ll if it’s popping out correctly and if the water is spraying out in the right direction.

And that should do it. It’s actually quite simple to fix a busted sprinkler. You can hire a pro for at least $50 or do it yourself for under $10.

Special thanks to our friends over at www.sprinklerrepairfresno.com

It always happens. You mow your lawn. You water your lawn. You fertilize your lawn and no matter what you do, weeds start to sprout out of the lawn giving your lawn a massive eyesore. We all know deep down inside that no one is walking around the neighborhood judging and awarding prizes to the best lawns on the block but to you, it really bothers you. It probably irritates the hell out of you and you murmur and curse under your breath that you want those little bastard’s dead!

Well, we are going to share with you some tips on how to get rid of those weed off your lawn so you don’t get to deal with those little bastards anymore. So, let’s get to it!

First, you must understand why weeds pop up in the first place in your lawn. Here’s why.

Weeds are always looking for some fertile and open spot they can grow in, wait, let me take that back. Weeds are looking for ANY open spot anywhere to sprout out and grow, hence why they grow in the craziest of places like the crack in a sidewalk or even on a small amount of dirt that’s been sitting around for a little while. They are some tough and persistent little pests! So, any open spot on your lawn will is considered “fair game” as long as the weed is concerned and will take full advantage of it.

Our objective here is to “crowd out” any possible weed from ever getting into your lawn in the first place. Imagine going to a sold old Metallica concert and having every conceivable seat taken in the arena by a raging and screaming fan. Imagine you were late in getting tickets and there are even a few extra fans that got in and there is standing room only in the place. There is no way you’re going to get a seat and get in. You’re straight out of luck. Well, the same thing is going to happen here with your lawn. We are going to grow a blade of grass in every single square inch of your soil that no weed can possibly get in.

So, here we go. First off, go out and get any brand of broadleaf weed killer for lawns at any home improvement store like Home Depot or Lowes. Spray your lawn with it and let it work its magic. It will take a few days, but it will kill off the weeds. Next, look for any open patches of grass and fill it in with turf builder or more seeds of grass of the same type of grass you got growing on your lawn.

Check all your sprinklers to make sure they are all working properly and watering every section of your lawn adequately with water. Next, aerate your lawn as described here in this article and fertilize your lawn properly. Water the hell out of it to let our lawn really bring in the nutrients and give all of your new seeds in the patches of empty soil a great start in growth. The key here is to give your lawn a super strong root system and strong blades on the surface. When you mow it, mow it at a slightly higher level than you had before. Again, we are trying to build a strong and sturdy lawn here with absolutely no breathing room whatsoever for any weed to find a place to take root.

Do all the following steps with persistence and consistency. Be patient. Before you know it you will have built a lawn so powerful and so dense that it is simply impossible for any weed to even think about growing on it. We want to fill in the arena with crazy fans! Not only that, fill it with extremely overweight fans! Next time a weed thinks about growing on your lawn, they’ll think twice and just float on over into the crack in the sidewalk or a fresh spot on your neighbor’s lawn.